Ultra Thin Industrial Grade
High Performance Protective Insulation Coating

Features:

• Outstanding corrosion protection and insulation properties
• Easy Application with brush, roller or airless sprayer.
• Non-toxic, water-based
• Color: Translucent finish, with White Top Coat also available.
• Allows for visual inspection of the substrate through the coating
• It exhibits outstanding durability with excellent adhesion to steel, aluminum, galvanized aluminum, fiberglass, pvc, wood, concrete, plastic, and many more substrates.
• Cost Effective Product - Long Term Savings
• Spread Rate 150-175 Sq. Ft. per gallon with a three-coat coverage, varies depending on surface porosity and texture.

Benefits:

• Protects Against Corrosion Under Insulation (CUI)
• Excels in Providing Thermal Insulation in a Thin Layer
• Space Saving – each coat is applied at 3-5 wet mils; a full three-coat application will dry to 4.5-7.5 dry mils.
• Easy Cleanup – soap and water
• Can be painted over
• Low Installation Cost
• Prevents rust
• Helps prevent burns
• Ideal pipe insulation and tank insulation
• High temperature environments – up to 400F (204C) for our High Heat formula.
• Do it yourself – easily applied by maintenance crews or individuals.
• Equally suited for Industrial and Home Insulation Use.
• Energy Savings - a cost effective way to save money on your energy & fuel bills.

QUESTIONS AND ANSWERS:

IS IT DIFFICULT TO APPLY?:
No… it’s easy to apply. Nansulate® Translucent is easily applied with a paint brush, paint roller, or paint sprayer.

HOW DOES IT LOOK?
It dries to a touch, smooth, durable, semi-transparent surface.

WHAT TEMPERATURE EXTREMES CAN HIGH HEAT HANDLE?
From a low of -40F to a high of 400F (-40C to 204C)

HOW CAN I BUY IT?
Click on the “Order” button and you can purchase it right over the internet with our secure order processing form.

WHAT IF I NEED HELP OR HAVE QUESTIONS?
Most people find it easy to use and apply, but if you have a question you can reach our customer service department by email or by telephone to our Customer Service Center 24 hours a day, 7 days a week. (Please see our Contact Page for email address or phone numbers for your area.) Your questions will be forward to the technician who can best help you they respond promptly.

IS THERE A WARRANTY?
Manufacturer's Limited Warranty: is for 5 years when applied as instructed and used as a Direct to Metal Coating. See full copy of Warranty for details.

 

Nansulate® QUICK FACTS:

Coat Thickness:

Each coat should be applied at between 3-5 wet mils. When applied too thick, you may experience cracking when drying. Most paint stores can supply you with an inexpensive wet mil thickness gauge.

Temperature Difference Range:

With each three coat application you will receive an average temperature difference of 60 degrees F. Due to the nature of heat transfer, the larger the difference between your high and low temperatures, the larger difference you will see with Nansulate®; The smaller difference between your high/low temperatures, the smaller difference you will see.

What is the R-Value of Nansulate®?

The R-Value is formulated using an inch of thickness as a measure. Due to the fact that Nansulate® is made to go on in a thin layer - less than an inch thick - an R-Value cannot be calculated for it. However the R-Value is only a measure of how a material works to insulate against Conduction, and not the other two methods of heat transfer, Convection and Radiation. Nansulate® will protect against all three methods of heat transfer and help to create a total thermal barrier, not only insulate by trapping air, as other insulations do.

More questions and answers can be found on our FAQ Page.